-
245 -
129 -
371 -
87
3119 plików
125,76 GB
Pre-Requiste
1) You need Jade-Hard-SPL_V3 for OEM 1.40.** builds / Jade-Hard-SPL_V41 for OEM 2.32.** Builds -> Get it from here <- Follow instructions in the thread
( How to Know Your SPL -> Switch Off Jade, Then Press Volume Down key, then Press Power Button. Now you see Tricolor Bootloader Screen showing your SPL number)
Preparation
1) Download the ROM in the first post posted by CHEFs
2) unzip the NBH file into a folder - ( RUU_signed.nbh <- Name and Extension should be this, do not change it)
3) Put CustomRUU (get from here) into the same folder of NBH file ( as of step-2)
Method-1
1) Switch off your jade by pressing power button
2) Go to bootloader by pressing Volume key down first then power button
3) You see tricolor screen saying SPL 2.32.olinex (If you don't see this then Follow Hard SPL procedure as per procedure here)
4) Connect your Jade using USB cable to your system
5) You should see USB in the Jade Screen
6) Run CustomRUU
7) Follow instructions given by CustomRUU
Method-2
1) Synchronize your PC thru Activesync (Get it from here and install in your PC if your PC don't have)
( For Vista users-> ActiveSync can only be used when flashing with Windows XP PC, with Vista PC you need Windows Mobile Device Center from Get it from here ) <- Thx to Nirak
2) Once your Jade is synchronized then run CustomRUU
3) Follow Instruction given by CustomRUU
Flash Issue Recovery
If you accidentaly disconnect Jade from PC during flashing.. just follow onscreen CustomRUU instructions in you PC
If your Jade Struck (flash % stays at some number and no progress for quite some time) during flashing.
Check your HardSPL version and the ROM OEM build version, Hard SPL should be 2.32.olinex for OEM 2.32.** builds, Hard SPL should be 1.40.olinex for OEM 1.40.** builds
If above is checked, then Switch off your jade by removing battery
Then follow Method-1
If your Jade is JADE110 SPL 1.70.** then install HARDSPLV41 as per instructions in Thread post#18
How To Hard Reset your Jade
Soft Method
1) Start Menu -> Settings -> System -> Clear Storage
Using Hardware Keys
1) Press Volume down key then press confirmation key (middle button near Navigation Keys) then Press Power Key. Follow on-screen instructions
HOW TO FLASH ROM ON JADE FROM THE SD CARD (Thx to Haree) (Original Thread)
1. Rename the .nbh file of your rom of choice to JADEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
How to DUMP your STOCK ROM -> Read Here
To Restore a DUMPED ROM -> Read Here
German tutorial can be found here: http://www.youtube.com/watch?v=fV2I2WAFkg4 Was tun wenn ein ROM Update fehlgeschlagen ist? HTC Wiederherstellen. Thanks to Dam79
Q & A
Q: Do I need to remove sim and sd card or not? (By ilovetouch)
A: Not Necessary
Q: Unable to turn off Antivirus..? Antivirus deletes customRUU.exe (by welshbloke70)
A: 1) unzip any stock ROM to a folder
2) copy your Cooked RUU_signed.nbh to that folder replacing the STOCK one.
3) Now Run the Romupate utility
Experts please post additional instructions if missed in above post.
Thx to UDK,Olinex and other xda-developers.
Nie ma plików w tym folderze
-
0 -
0 -
0 -
0
0 plików
0 KB